油田聚驱采出液乳化特性及其破乳-絮凝

翁艺斌, 阎光绪, 李敏, 翟星月, 郭绍辉, 张佩佩. 油田聚驱采出液乳化特性及其破乳-絮凝[J]. 环境工程学报, 2015, 9(9): 4259-4264. doi: 10.12030/j.cjee.20150927
引用本文: 翁艺斌, 阎光绪, 李敏, 翟星月, 郭绍辉, 张佩佩. 油田聚驱采出液乳化特性及其破乳-絮凝[J]. 环境工程学报, 2015, 9(9): 4259-4264. doi: 10.12030/j.cjee.20150927
Weng Yibin, Yan Guangxu, Li Min, Zhai Xingyue, Guo Shaohui, Zhang Peipei. Emulsification properties and demulsification flocculation treatment of oilfield polymer flooding produced liquid[J]. Chinese Journal of Environmental Engineering, 2015, 9(9): 4259-4264. doi: 10.12030/j.cjee.20150927
Citation: Weng Yibin, Yan Guangxu, Li Min, Zhai Xingyue, Guo Shaohui, Zhang Peipei. Emulsification properties and demulsification flocculation treatment of oilfield polymer flooding produced liquid[J]. Chinese Journal of Environmental Engineering, 2015, 9(9): 4259-4264. doi: 10.12030/j.cjee.20150927

油田聚驱采出液乳化特性及其破乳-絮凝

  • 基金项目:

    国家高技术研究发展计划(863)项目(2012AA063401)

  • 中图分类号: X741

Emulsification properties and demulsification flocculation treatment of oilfield polymer flooding produced liquid

  • Fund Project:
  • 摘要: 为了解决国内某油田聚驱采出液油水分离的难题,对聚驱采出液的水质特性和乳化特性进行研究,考察了驱油剂聚丙烯酰胺(HPAM)对污水乳化程度的影响,针对该污水开发、筛选出最优的高效破乳剂,考察了投加量及温度对污水破乳效果的影响,并进行了破乳-絮凝复配实验研究。实验结果表明,该油田聚驱采油污水油含量、悬浮物、硫含量、Fe2+均较高,乳化程度严重且具有较强乳化稳定性,油水分离困难;HPAM的存在增强了污水的乳化程度;当破乳温度为65℃,停留时间为2 h时,投加6 mg/L的PAM4#时除油效率约为72%,在破乳后的水样中投加100 mg/L的PAS,含油量可降低至27.0 mg/L,悬浮物降低至9.0 mg/L,处理后水样达到该油田回注水的水质标准。
  • 加载中
  • [1] 魏冉. 油田三次采油驱油技术应用探讨. 化学工程与装备, 2014, (5): 152-153 Wei Ran. Oilfield tertiary oil displacement technique application. Chemical Engineering & Equipment, 2014, (5): 152-153(in Chinese)
    [2] 苏岳丽, 刘伟, 吕彩霞, 等. 聚驱后提高采收率方法研究与试验. 中国石油和化工, 2013, (2): 56-58 Su Yueli, Liu Wei, Lü Caixia, et al. Research on method for improve oil recovery after polymer flooding. China Petroleum and Chemical Industry, 2013, (2): 56-58(in Chinese)
    [3] 邓浩, 许颖, 蒋生健, 等. 油田回注水水质恶化成因的研究. 环境工程学报, 2014, 8(4): 1487-1490 Deng Hao, Xu Ying, Jiang Shengjian, et al. Study on deterioration of oil field injection water quality. Chinese Journal of Environmental Engineering, 2014, 8(4): 1487-1490(in Chinese)
    [4] 罗一菁, 张忠智, 赵树英, 等. 聚合物驱采油污水处理研究进展. 石油化工高等学校学报, 2003, 16(1): 9-13 Luo Yijing, Zhang Zhongzhi, Zhao Shuying, et al. Progressive research of treatment for sewage produced from polymer flooding displacement. Journal of Petrochemical Universities, 2003, 16(1): 9-13(in Chinese)
    [5] 王素芳, 林蓓, 吴涛, 等. 高含盐采油污水特性研究. 工业水处理, 2011, 31(8): 45-47 Wang Sufang, Lin Bei, Wu Tao, et al. Study on the characters of high-salinity wastewater from oil production. Industrial Water Treatment, 2011, 31(8): 45-47(in Chinese)
    [6] 王慧云, 刘爱芹, 温新民. 影响油田采出水界面电性质的因素. 中国石油大学学报(自然科学版), 2008, 32(3): 144-151 Wang Huiyun, Liu Aiqin, Wen Xinmin. Factors influencing interfacial electric properties of produced water from oilfield. Journal of China University of Petroleum, 2008, 32(3): 144-151(in Chinese)
    [7] 祝威. 固体颗粒对油田采出水性质的影响. 中国石油大学学报(自然科学版), 2008, 32(5): 126-131 Zu Wei. Effect of solid particle on quality of oilfield produced water. Journal of China University of Petroleum, 2008, 32(5): 126-131(in Chinese)
    [8] 尹先清, 张健, 靖波, 等. 聚驱污水含聚量对污水处理设备的影响. 环境工程学报, 2012, 6(10): 3499-3502 Yin Xianqing, Zhang Jian, Jing Bo, et al. Effect of polymer content of polymer-flooding sewage water on equipment for wastewater treatment. Chinese Journal of Environmental Engineering, 2012, 6(10): 3499-3502(in Chinese)
    [9] Zhang Yongqiang, Gao Baoyu, Lu Lei, et al. Treatment of produced water from polymer flooding in oil production by the combined method of hydrolysis acidification-dynamic membrane bioreactor-coagulation process. Journal of Petroleum Science and Engineering, 2010, 74(1-2): 14-19
    [10] Qu Guohui, Gong Xingguo, Liu Yikun. New research progress of the demulsification of produced liquid by polymer flooding. Journal of Chemical and Pharmaceutical Research, 2014, 6(1): 634-640
    [11] Fang Shenwen, Duan Ming, Long Weihong, et al. Treatment of produced liquid from polymer flooding by using cationic surfactant. Separation Science and Technology, 2014, 49(3): 432-437
    [12] Jung J. C., Zhang Ke, Chon B. H., et al. Rheology and polymer flooding characteristics of partially hydrolyzed polyacrylamide for enhanced heavy oil recovery. Journal of Applied Polymer Science, 2013, 127(6): 4833-4839
    [13] Ma Baodong, Gao Baoyu, Yue Qinyan. Study on emulsification stability of wastewater produced by polymer flooding. Journal of Petroleum Science and Engineering, 2013, 110: 27-31
    [14] Liu Jinhe, Fang Xiaowei, Wang Zongxian, et al. Effects of partially hydrolyzed polyacrylamide on interfacial dilational properties of gudao crude oil and its acidic/basic fractions. Energy & Fuels, 2012, 26(6): 3488-3496
    [15] Zhang Hongzhong, Fang Shaoming, Ye Changming, et al. Treatment of waste filature oil/water emulsion by combined demulsification and reverse osmosis. Separation and Purification Technology, 2008, 63(2): 264-268
    [16] 张永强, 高宝玉, 岳钦艳, 等. 铝盐混凝剂处理胜利油田聚合物驱采出水混凝机理研究. 工业水处理, 2009, 29(11): 39-43 Zhang Yongqiang, Gao Baoyu, Yue Qinyan. Study on the coagulation mechanism of wastewater produced from polymer flooding in Shengli Oilfield with aluminum salt coagulants. Industrial Water Treatment, 2009, 29(11): 39-43(in Chinese)
  • 加载中
计量
  • 文章访问数:  2274
  • HTML全文浏览数:  1817
  • PDF下载数:  1404
  • 施引文献:  0
出版历程
  • 收稿日期:  2014-07-23
  • 刊出日期:  2015-09-15
翁艺斌, 阎光绪, 李敏, 翟星月, 郭绍辉, 张佩佩. 油田聚驱采出液乳化特性及其破乳-絮凝[J]. 环境工程学报, 2015, 9(9): 4259-4264. doi: 10.12030/j.cjee.20150927
引用本文: 翁艺斌, 阎光绪, 李敏, 翟星月, 郭绍辉, 张佩佩. 油田聚驱采出液乳化特性及其破乳-絮凝[J]. 环境工程学报, 2015, 9(9): 4259-4264. doi: 10.12030/j.cjee.20150927
Weng Yibin, Yan Guangxu, Li Min, Zhai Xingyue, Guo Shaohui, Zhang Peipei. Emulsification properties and demulsification flocculation treatment of oilfield polymer flooding produced liquid[J]. Chinese Journal of Environmental Engineering, 2015, 9(9): 4259-4264. doi: 10.12030/j.cjee.20150927
Citation: Weng Yibin, Yan Guangxu, Li Min, Zhai Xingyue, Guo Shaohui, Zhang Peipei. Emulsification properties and demulsification flocculation treatment of oilfield polymer flooding produced liquid[J]. Chinese Journal of Environmental Engineering, 2015, 9(9): 4259-4264. doi: 10.12030/j.cjee.20150927

油田聚驱采出液乳化特性及其破乳-絮凝

  • 1. 中国石油大学(北京) 重质油国家重点实验室 油气污染防治北京市重点实验室, 北京 102249
  • 2. 中海油天津液化天然气有限责任公司, 天津 300452
基金项目:

国家高技术研究发展计划(863)项目(2012AA063401)

摘要: 为了解决国内某油田聚驱采出液油水分离的难题,对聚驱采出液的水质特性和乳化特性进行研究,考察了驱油剂聚丙烯酰胺(HPAM)对污水乳化程度的影响,针对该污水开发、筛选出最优的高效破乳剂,考察了投加量及温度对污水破乳效果的影响,并进行了破乳-絮凝复配实验研究。实验结果表明,该油田聚驱采油污水油含量、悬浮物、硫含量、Fe2+均较高,乳化程度严重且具有较强乳化稳定性,油水分离困难;HPAM的存在增强了污水的乳化程度;当破乳温度为65℃,停留时间为2 h时,投加6 mg/L的PAM4#时除油效率约为72%,在破乳后的水样中投加100 mg/L的PAS,含油量可降低至27.0 mg/L,悬浮物降低至9.0 mg/L,处理后水样达到该油田回注水的水质标准。

English Abstract

参考文献 (16)

返回顶部

目录

/

返回文章
返回